[ Outline ] · Standard · Linear+ License Activation Patch for V11

[IronKevin]

Subject: IRONCAD/INOVATE V11.0 License Update Notice!

To: IRONCAD and INOVATE Version 11.0 Users Running on Windows 32-bit OS.

Issue: Activation of Licenses will fail to complete properly.

Requirement: After installing IRONCAD/INOVATE Version 11.0, download and install the following patch to your machine.

* IRONCAD V11.0 32-Bit OS Version License Patch:
IRONCADV11LicenseUpdate

* INOVATE V11.0 32-bit OS Version License Patch:
INOVATEV11LicenseUpdate.exe



Dear Valued Customer,

We at IronCAD greatly appreciate your continuous support and would like to apologize for the extra effort required for the activation process for IRONCAD 11.0. Due to product changes and our current license database, additional changes are required to the release version of IRONCAD and INOVATE running on 32-Bit OS. Thank you for your understanding and support and we hope you enjoy IronCAD version 11.

Sincerely,

IronCAD Support Team

[IronKevin]

Couple things to try:

1) Install this driver for the dongle:
ftp://ftp.ironcad.com/download/SPI750W.zip


2) Try manually installing the license:

Use the Email activation option
If the double-clicking the incoming license file fails:

In this case you will need to copy the license file into place manually:

1. Copy the IVBNUS11-******.icl file to \Program Files\IronCAD\11.0\bin
2. Rename \Program Files\IronCAD\11.0\bin\lservrc to \Program Files\IronCAD\11.0\bin\lservrc.old
3. Rename \Program Files\IronCAD\11.0\bin\IVBNUS11-******.icl to lservrc (no file extension)

At this point Inovate should start.

[Bernd Meißner]

Couple things to try:

1)  Install this driver for the dongle:
ftp://ftp.ironcad.com/download/SPI750W.zip

Thanks, updating the dongle driver did it, although this has been working for versions 8 through 10 without a problem. The demo/registration dialog is gone for now, without doing the activation process again. So let's see what happens in 29 days ;-)

Thanks again,
Bernd